INSPECTION & SERVICING

Walmsleys have a specialist team to inspect your Yankee, MG or paper dryers. This can form part of your preventative maintenance programme, for statutory insurance purposes or to monitor known issues. Inspections are external and internal so include condensate removal systems and spoiler / turbulator bars.

Common inspections include:

  • General Condition

  • Steam Leak Checks

  • Head Tilt Measurement Checks

  • Head to Shell Joint Inspection

  • Shell Run-out Measurements

  • Shell Thickness Measurements

  • Surface Roughness Measurements.

  • Full Internal Inspections

  • Insulation Sleeve Testing

  • Repairs / Overhaul / Resetting of condensate removal system

  • Replacement of parts

  • NDT (Non Destructive Testing – MPI, DP & UT)

  • Independent technical advice

  • Yankee Balance

  • Independent Inspections of new Yankee Dryers or MG Cylinders at manufacturers site

  • Diagnostics

  • Balancing

  • FEA analysis

Please contact us to discuss your requirements.

Walmsleys Yankee Dryer Head Tilt Inspection
Walmsleys Yankee Dryer Condensate System Inspection
Recent Dryer Inspections

 

  • Inspection services on five 12ft diameter Yankee Dryers – USA

  • Inspection Services on three 15ft diameter Yankee Dryers – USA

  • Inspection Services on two 18ft diameter Yankee Dryers – USA

  • Inspection Services on three 18ft diameter Yankee Dryers – UK

  • Inspection Services on three 16ft diameter Yankee Dryers – UK

  • Inspection Services on four 18ft diameter Yankee Dryers – UK

  • Inspection Services on one 10ft diameter Recrepe Dryer – UK

  • Inspection Services on a 15ft diameter Yankee Dryer – Egypt

  • Inspection services on a 3.6m diameter Yankee Dryer – UAE

  • Inspection Services on three 5.5m diameter Yankee Dryers – Germany

  • Inspection Services on a 12ft diameter Yankee Dryer – Belgium

  • Inspection Services on a 4.5m diameter Yankee Dryer – Brazil

  • Inspection Services on a 15ft diameter Yankee Dryer – Australia

  • Inspection Services on an 18ft diameter Yankee Dryer – Canada

  • Inspection Services on four 18ft diameter Yankee Dryers – Spain

  • Inspection Services on an 18ft diameter Yankee Dryer – France

  • Inspection services on an 18ft diameter Yankee Dryer – Russia

  • Inspection Services on a 5.5m diameter Yankee Dryer – Chile

  • Inspection Services on a 15ft diameter Yankee Dryer – Bahrain

  • Inspection Services on a 4.5m diameter Yankee Dryer – Argentina

  • Inspection Services on a 4.5m diameter Yankee Dryer – Portugal

Walmsleys Yankee Dryer Bolt NDT Inspection
Walmsleys Yankee Dryer Bolt Upgrade Complete
Recent Services

 

  • Bolt Changes on a 15ft diameter Yankee Dryer – Australia

  • Bolt Changes on an 18ft diameter Yankee Dryer – New Zealand

  • Bolt Changes on 5ft diameter Can Dryers – UK

  • Removal of Overhung Shell on a 12ft diameter Yankee Dryer- USA

  • Bolt Changes on two 18ft diameter Yankee Dryers – France

  • Bolt Changes on a 15ft diameter Yankee Dryer – France

  • Bolt Changes on two 15ft diameter Yankee Dryers – UK

  • Scoop Replacement on 12ft diameter Yankee Dryer – Canada

  • Bolt Changes on a 16ft diameter Yankee Dryer – UK

  • Bolt Changes on 14ft diameter Recrepe Dryer – UK

  • Rear Insulation Sleeve Change on an 18ft diameter Yankee Dryer – UK

  • Bolt Changes on a 10ft diameter Recrepe Dryer – UK

  • Rear Insulation Sleeve Change on a 10ft diameter Recrepe Dryer – UK

  • Bolt Changes on a 12ft diameter Yankee Dryer – USA

  • Replace all Internal Gaskets on a 4.75m diameter Yankee Dryer – UK

  • Bolt Changes on a 15ft diameter Yankee Dryer – USA

  • Front and Rear Insulation Sleeve Changes on a 15ft Yankee Dryer – USA

  • Bolt Changes on a 15ft diameter Yankee Dryer – Peru

  • Bolt Changes on a 4.75m diameter Yankee Dryer – Peru

  • Bolt Changes on an 11ft diameter Yankee Dryer – Columbia

  • Bolt changes on a 4.2m diameter Yankee Dryer – Turkey

  • Replace Front Bearing on a 16ft diameter Yankee Dryer - UK